Video Inserter & Touch Interface - Comand NTG4 / NTG4.5 Online - Audio 20 and 50 APS

• This Video Interface allows to integrate external Multimedia devices into the Infotainment system of the vehicle, using the original car’s monitor

• With this interface, the source changing is possible to be done from the multifunction steering wheel (depending on the vehicle’s model *), in addition to other possibilities

It also allows to connect devices controlled by touch screen (a touch panel  must be installed (NOT INCLUDED)) check related products

Compatibility table: (in case you have any doubt about your vehicle, please contact us)

Display's compatible plug:

Technical specifications:

Inputs:

• 1x RGB (navigation module, GPS BOX or similar)
  
• 2x AV (NTSC and PAL)
• 1x CVBS (for Rear View Camera)
• 1x Vehicle’s monitor connector

Outputs:

• 1x CVBS (Video Out)
• 1x Audio L/R

* Source changing:

• Steering Wheel “RETURN” button

• Control panel's "RETURN" button

Additional functions:

• FPG (Flexible Parking Guidelines) + OPS (Optical Parking System): If you install an aftermarket Rear View Camera, this interface will show moving parking guidelines, which move depending on your steering wheel's angle. If your car is also equipped with Parking Sensors, you won't loose the image of the sensors, as they are combined at the same image
  

1112

1113

• This Multimedia Interface only allows video signal integration/switching; for audio signal integration you have to connect your device’s (DVD, TV Tuner, Navigation…) audio outputs to the vehicle’s AUX-IN input or installing our audio integration voice modules. Making this procedure your audio signal will be reproduced at your vehicle’s speakers.

1114