Sound Booster PRO - Complete specific kit with Active Sound module - Audi A3 (8V) - External

 Sound Booster PRO complete specific kit with Active Sound module and external sound generator for Audi A3 (8V) vehicles.

Sound Booster PRO system description:

• The Sound Booster PRO kits simulates the sound of a powerful engine (V6 / V8) or create a new and unique characteristic sound for your vehicle.
  

• The base is a sound generator. An electrical input signal (ex. speed) goes through the system and the electro-acoustic conversor generates an audio signal. This signal is sent by sound transmission through a conduit and/or any exhaust system or pipe.

• The Sound Booster PRO system is compatible with almost any brand and car model. The prerequisit for its installation is a CAN-BUS system engine.

• There are two possible types of installation: external or internal, you can install the sound generator under the vehicle or inside the vehicle (spare wheel area)

• If your vehicle already has an "Active Sound" system installed from factory, you can install an "Active Sound Boost" kit, which amplifies the existent sound of the vehicle.
  

• The Sound Booster PRO kits are the ideal and cheaper solution to enjoy the sound of a powerful engine, without the need of replacing the vehicle's engine.

• The "Active Sound" system can be activated easily through a button, which also allows you to change the different sound profiles.

"Active Sound" system overview and features:

• It's an Audi genuine system, which is factory installed on all TDI models with 313 hp engines
  
• The external sound generator "simulates" the sound of a powerful engine, replacing the typical sound of a TDI engine
• This sound is achieved without the need of installing any sport exhaust system
• The level/profile 1 of sound, offers a decent sound quality for noise sensitive areas (up to 6 levels/profiles)
  
• The Sound Booster PRO system brings a unique sound to all the system
  
• A powerful V6 / V8 engine sound (depending on configuration)
  
• It has a LED status indicator, for an easier installation
  
• You can choose up to 6 levels/profiles of sound
  
• Choose the sound profile through a button, remote controller, or through vehicle integration (ex: Cruise control lever "Tempomat")
• It is recommend to install the level/profile button at the driver's footwell
  
• Free download of the configuration sound software

• Control unit for engine sound generation
• External sound generator
  
• Bracket
• Sound Booster PRO module
  
• Cable set
  

• Before make the order check that the vehicle has enough space at the underbody to install the external sound generator. Due to the different vehicle's equipment and variants of the same vehicle model, it is possible that there is not enough space available at the vehicle's underbody to install the external sound generator. Should this be the case, you can contact us about the readjustment of the position, we are able to do this job at our workshop, or you can contact an specialist workshop of your trust.

• By installing this retrofit it will change the vehicle's noise emissions (when active), check the legislation of your country about noise emissions.

• We would like to point out that the use of this retrofit is at your own risk.

• Before make an order, it's necessary to send us an email with your vehicle's chassis VIN number. You can send the chassis number to info@vag-navisystems.com

• We recommend that the installation will be performed by a qualified specialist.