Video Interface - Audi RMC, MMI3G, MMI3G+, VW RNS 850 - HSD 6.5",7" & 8" - PAS + PDC

• This Video Interface allows to integrate external Multimedia devices into the Infotainment system of the vehicle, using the original car’s monitor

• With this interface, the source changing its possible pressing a key button from the multifunction steering wheel or from the MMI control panel.

• The video interface offers the function of PAS active parking guidelines with PDC support.

Compatibility table: (in case you have any doubt about your vehicle, please contact us)

*The Interface ‘s compatible RMC/MMI devices are equipped with the HSD image connector showed below (PINK: 400x234/GREY: 800x480)

Technical specifications:

Inputs:

• 1x RGB
• 3x AV (NTSC and PAL)
• 1x CVBS (for Rear View Camera)
• 1x HSD connection for the vehicle’s monitor.

Outputs:

• 2x CVBS (Video Out)
• 1x Audio L/R

 Source changing:

• Steering Wheel “iNAV” or “MODE” button (depending on the vehicle).

• MMI’s control panel “NAV” button (depending on the vehicle).

• RNS' 850 "NAV" button
  

• External switch (included)

• Automatic display of the image from the connected reverse camera when reversing (if connected via CAN cable or rear lamp cable)

• Car video interface module
• Remote controller with IR cable or OSD keypad
• Remote mode switch button
• Cables set
  • Power cable
  • A/V cable
  • Cable for display connection
  • RGB cable
  • Power cable for rear view camera

• This Interface only allows video signal integration/switching; for audio signal integration you have to connect your device’s (DVD, TV Tuner, Navigation…) audio outputs to the vehicle’s AUX-IN input or installing our audio integration voice modules. Making this procedure your audio signal will be reproduced at your vehicle’s speakers